YDL-300 Series Full Hydraulic Multifunctional Drilling Rig,Mine Drilling Rig,Water Well Drilling Rig

 
Production Introduction:

YDL-300 series full hydraulic multifunctional drilling rig is a new type, high efficiency, energy saving and

multifunctional full hydraulic driving and power head multifunctional drilling rig. Mainly used for drilling

wells such as water wells, monitoring wells, geothermal air conditioning holes, national defense projects,

anti-floating anchors, cable stayed anchors, high-pressure rotary jets, etc .; also suitable for hydropower

projects, railways, highways, urban foundations and other rocks Construction of large-aperture vertical

holes in soil engineering; grouting reinforcement holes; small foundation pile holes; miniature piles, etc.

After the drilling rig is equipped with corresponding drilling tools, it can perform a variety of processes,

such as pneumatic down-the-hole hammer drilling, air foam drilling, gas lift reverse circulation drilling,

long spiral drilling, mud circulation drilling, eccentric tube drilling, dental drilling Wheel bit drilling, hydraulic

hammer drilling, etc.

The biggest feature of this rig is that the power head has a stroke of 7 meters, and is equipped with a large

torque hydraulic motor to swing, and the cylinder has a large propulsion and lifting capacity. Users can

choose a hydraulic telescopic manipulator and a hydraulic winch on the top of the mast to reduce labor

intensity. The power head has multiple speeds, which makes the drilling range wider. The hydraulic

outrigger has a large stroke and can be transferred to the field without crane crane.

Main Feature:

1. The drilling rig has strong drilling ability, wide application range, fast drilling speed, strong accident

handling ability, and high drilling efficiency.

2. The power head of the rig can be mechanically and hydraulically variable. Suitable for various drilling

methods such as down-the-hole hammer, heel pipe, full casing and alloy turning.

3, 2 large oil cylinders on the mast, lifting force of 25 tons, can be used to pull the casing when drilling with

eccentric pipe, can also be used for small non-excavation construction.

4. The drilling rig adopts the inner and outer telescopic masts, the power head travel reaches 7 meters, and

two 3 meters drill rods can be drilled at one time, which reduces the time of adding drill rods once and

doubles the efficiency. Especially suitable for high-pressure rotary spray.

5. Equipped with a propelling frame with a stroke of 1.5m, the mast can be pushed directly to the orifice or

support the ground, and the drilling is more stable.

6. The main shaft adopts a telescopic buffer mechanism, which can effectively protect the drilling tool, and at

the same time, it protects the drill pipe wire buckle from being damaged during shackle.

7. The rig is equipped with a hydraulic gripper on the orifice device, which automatically releases the shackle

to reduce the auxiliary time and reduce the labor intensity. The orifice is equipped with a guide device, which

makes the drilling more stable and reliable.

8. The rig is mounted on the crawler chassis, so that the whole machine is shifted, and the walking is faster

and more convenient. Users can choose iron tracks or engineering rubber tracks. Engineering rubber tracks

do not hurt the ground, and they can work in cities.

9. The rig adopts 4 long-stroke outrigger cylinders, and can be rotated to both sides or optional hydraulic

lateral telescopic legs. After the 4 outrigger cylinders are braced, the stroke reaches 1600mm, and the car

can be poured directly in. No crane rig is needed Can be transferred to the loading and unloading.

10. The main components of the hydraulic system of the rig are domestic and foreign famous products, which

make the performance of the machine stable, reliable and long life.

11. The drilling rig can be applied to a variety of drilling processes: long spiral drilling, air DTH hammer drilling,

mud positive circulation full casing drilling, air DTH hammer and pipe drilling, roller bit drilling, high pressure

rotary jetting Homework, etc.

12. There is a tool hoist (1.5 tons lifting force) on the top of the mast, which is convenient for lifting tools such as

drill rods.

13. On the platform beside the mast, users can choose a hydraulic telescopic manipulator, which is a good

helper for inclined hole operations.

14. The drilling rig has a high-position rotary platform, which makes the drilling rig more flexible during

construction.

15, according to user needs, can be configured with a booster pump (motor or hydraulic motor drive).

16. Users can choose electric motor or diesel engine as the power of drilling rig.

17. Users can customize the short stroke or long stroke according to their needs.

Technical Parameters:

Photos of YDL-300 Series Full Hydraulic Multifunctional Drilling Rig: