Eternal Bliss Alloy Casting & Forging Co.,Ltd.

About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home News

Stellite 25 Cobalt-based alloy electrode and wire

Good quality High Alloy Forgings for sales
Good quality High Alloy Forgings for sales
Professional at casting expertise and efficient at export operation and considerate arrangement.

—— Alex Chrischurch

I'm Online Chat Now
Company News
Stellite 25 Cobalt-based alloy electrode and wire

1. Product Introduction

Stellite cobalt base alloys consist of complex carbides in an alloy matrix. They are resistant to wear, galling and corrosion and retain these properties at high temperatures. Their exceptional wear resistance is due mainly to the unique inherent characteristics of the hard carbide phase dispersed in a CoCr alloy matrix.



This tungsten strengthened cobalt-chromium alloy is the cast version of the wrought alloy L605. A special low carbon material has been found to have exceptional thermal fatigue resistance and is useful for tools to work hot steel. The alloy also resists hot metal on metal wear.


(2)Corrosion Resistance

Stellite alloy 25 is resistant to oxidation and carburization up to 1900°F. The alloy resists wet chlorine at ambient temperatures and is resistant to nitric and hydrochloric acids under certain conditions. Exposure testing is recommended to verify performance.



Stellite alloy 25 forms a protective oxide film during hot metal-on-metal wear which prevents metal transfer and damage due to adhesion. The alloy is resistant to thermal cracking and surface fatigue. Since the micro- structure is relatively free of carbide reinforcement, it is not recommended for low stress or low angle particle erosion service.


(4)Process performance and requirements

a.The alloy has satisfactory cold and hot forming properties. The thermal processing temperature ranges from 1200 ℃ to 980℃.

b.The average grain size of the alloy is closely related to the degree of deformation of the forging and the final forging temperature.

c.The alloy can be connected by melt welding, resistance welding and fiber welding.

d.Solid solution treatment of alloy: forgings and forging rods are 1230℃, water-cooled.


2. chemical composition

Composition (%) C Mn W S Si Cr Ni Co Fe
Stellite 25 ≤0.1 ≤1.5 14.0-16.0 ≤0.03 0.40-1.0 18.0-22.0 8.0-22.0 Bal ≤3.0






Stellite 25 Cobalt-based alloy electrode and wire






Eternal Bliss Alloy Casting & Forging Co, Ltd.

Technical Dept.


what’s app: 0086-13093023772


Pub Time : 2019-08-12 10:48:01 >> News list
Contact Details
Eternal Bliss Alloy Casting & Forging Co.,Ltd.

Contact Person: Mr. John Liu

Tel: 86--13093023772

Fax: 86-510-68792172

Send your inquiry directly to us (0 / 3000)