Heat resistant tube is a kind of industrial equipment, with high temperature strength and oxidation resistance, anti - carburizing, acid resistance and other characteristics.
Heat resistant tube has good oxidation resistance at high temperature.Heat resistant tube with high temperature strength and oxidation resistance, anti - carburizing, acid resistance, alkali resistance, tensile resistance and wear resistance, continuous use temperature of 1150℃.The usual operating temperature should not exceed 1050 degrees.The highest temperature is best not.Over 1200 degrees.USES: exhaust pipe, microwave oven, high temperature furnace, cremation furnace and other heat resistant steel, high heat/high temperature contact parts.
（1）Spiral elastic steel wire is deeply implanted into the tube wall
（2）Inner and outer walls are smooth
（3）The wall thickness is about 3~6 mm, depending on the diameter
3. Scope of application
As a special wear protection suction pipe, especially suitable for:
（1）used for low fluidity hot solid, such as sand, gravel, grain, waste glass debris
（2）used for gaseous and liquid media
（3）used for underground transportation
（4）used for glass factory tube, wharf, steel mill, quarry, shipyard, cement factory, etc.
4. Common properties
（1）very good heat resistance (better than TPE and Neopren)
（2）Super heavy duty
（3）High wear resistance protection (wear resistance is 2.5 to 5 times higher than most rubber materials, and 3 to 4 times higher than soft PVC)
（4）Smooth inside and outside
（5）Optimize flow characteristics
（7）withstand high pressure, vacuum and compression
（8）High axial strength
（9）high tensile strength, and tear strength
（10）good chemical resistance
（11）Good uv and ozone resistance
（12）Small bending radius
（13）not easy knot
（14）No softener and halogen
（15）Gas and liquid do not leak
（17）Electrostatic discharge (BGR 132, previous ZH 1/200, according to rule), grounded by spiral wir
5. Temperature range
About -40 °C to +125 °C
Eternal Bliss Alloy Casting & Forging Co, Ltd.
what’s app: 0086-13093023772